All-around protection for your creation

playPlay Video
enclosure-cover-img

Snapmaker 2.0 Enclosure

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

iconLaserReduction
iconPhysicalSafeguards
iconDustIsolation
iconExhaustSystem
iconTri-foldMagnetic Doors
iconDoorDetection

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser
Engraving Module, from class four to the lowest level of class one [1].
Laser Reduction

Dust Isolation

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.
Dust Isolation

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [2],
taking up only a very limited space, while providing sufficient childproofing.
Tri-fold Magnetic Doors

Door Detection

Laser or CNC job pauses automatically when either door is opened [3], giving you extra protection.
And don't worry about your creation – you can resume it with just a few taps.
Door Detection

Keep the Temperature Just Right

Warmth is maintained when you 3D print with high-performance filaments like ABS,
so that the print is less likely to warp due to temperature variation.
Keep the Temperature Just Right

Built-in LED Strips

Create as you like, whether it’s day or night.
Built-in LED Strips

Custom Software Support

Control the LED strips and exhaust fan using the
Touchscreen or Snapmaker Luban that you're familiar with.
Custom Software Support
summaryImgsummaryImg

All-purpose Beams for Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

A New Level of Air Safety

Chemicals such as PM (Particle Matters) and VOCs (Volatile Organic Compounds) can be released when you 3D print with or laser engrave on certain types of materials. You can further filter them with a Snapmaker 2.0 Air Purifier.

iconExclusive FilterCartridge
iconFilterDetection
iconFilter LifeDetection
iconFan SpeedControl
iconStatus Light
iconFull-metalDesign
air-purifier-cover-img
filter-element

The Exact Filter

Cartridge You Need

Tailor-made filter cartridge for your Snapmaker 2.0, with five layers of different filters consolidated into one, it is designed to absorb what's actually emitted during laser engraving or 3D printing process [5].

G4 Filter for

Coarse Filtration

Aims at relatively bigger particles (≥ 5 μm in diameter). It filters out more than 90% of PM10 and PM5.

iconPM10
iconPM5
iconParticles
iconDust

F9 Filter for

Finer Filtration

Works at particles that measure 1 μm or above in diameter. It filters out more than 95% of PM10, PM5 and PM2.5.

iconPM10
iconPM5
iconPM2.5

Customized Activated

Carbon Filter

A dense pack of activated carbon is also added to absorb VOCs that no other filters can capture. Unpleasant odor is no longer a problem.

iconVOCs

Ultra-dense HEPA

H13 Filter

Two layers of 70 mm-thick HEPA H13 filter as the final stage gate. They are able to trap up to 99.97% of airborne particles of all sizes, including PM0.3 that are known to be the most penetrating particles in the air.

iconPM2.5
iconPM0.3

All in one, Snapmaker 2.0 Air Purifier can be a pretty efficient emissions eliminator [7].

Long Live the Filter Cartridge

Efficiency is not all that matters. The different levels of filter are arranged in certain order inside the cartridge to maximize its lifespan, so that you won't need to replace the cartridge until it gets fully used.

Filter Life Detection

Snapmaker 2.0 carries out a real-time monitoring on the Filter Cartridge and shows its lifespan on the Touchscreen. It lets you know when it's time to pop in a new one.

Unpowered>
Working normally>
Connecting to the Controller>
Filter Cartridge taken out>
Low filter life or blocked inlet/outlet>
Danger>

Be in the Know

The built-in LED strip shows you how the Air Purifier is working
through its color change, flowing, breathing, and flashing.

Fan Speed Control

Tap on the Touchscreen to set fan speed for different types of job[7].

Full-metal Design

Both the Enclosure and the Air Purifier are neatly designed as ever. The CNC-machined aluminum beams and shell, with their surface anodized, deliver great durability, super-fine texture, a consistent silver gray looking, as well as well-sealed machine bodies. They're powerful, yet adorable.

Creativeness Knows No Bounds

Along with the CAN Hub, you can use the Enclosure and the Air Purifier together with all the existing and upcoming Snapmaker 2.0 addons.

Shop now at Snapmaker Online Store.

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.
[2] The A150 Enclosure's doors are magnetic, but can't be folded.
[3] Door Detection applies only to laser and CNC functions, excluding 3D printing.
[4] The Air Purifier must be used together with the Enclosure for Snapmaker 2.0.
[5] Using the Air Purifier when printing with ABS or other thermo-sensitive filaments may lead to poor printing quality. If you need to filter 3D printing emissions, it's recommended to turn on the Air Purifier after printing job is finished.
[6] Tested by CAS Testing Technical Services (Guangzhou) Co., Ltd, according to standards GB/T 14295-2019 and GB/T 34012-2017. Report No.: JKK21030129A(E), JKK21030129B(E).
[7] The Touchscreen UI is subject to change due to iterations.