3D Printed Christmas Tree Topper Ideas, From Mario Stars to Pikachu

3D printed Christmas tree topper featuring a golden star, surrounded by handmade wreath and lattice ornaments on a festive tree.

A Mario Super Star above a tree full of pixel ornaments. Pikachu perched on a golden star. A wizard’s staff rising out of evergreen branches. A 3D printed Christmas tree topper can set the direction for an entire holiday display.

Start with the shape you want to see across the room, then work down through the colors and smaller decorations. A gaming tree might repeat yellow stars and red accents; a woodland tree could use a pale staff, pinecones, and muted greens. The ideas below explore different looks, with a Pikachu model on Snapmaker Space as one ready-to-explore starting point.

Model availability, links, and download details may change. Check each model page for the latest information, or browse Snapmaker Space to discover more designs and find an alternative that suits your project.

Table of Contents

3D Printed Tree Topper Ideas to Build a Theme Around

A Mario Super Star—Rounded, Pixelated, or Glowing

Mario’s Super Star brings a familiar gaming character into a shape that already belongs at the top of a Christmas tree. A rounded yellow silhouette feels playful, while an 8-bit outline gives the same idea a retro look. Keep the eyes distinct: they carry much of the character, especially when you view the tree from a distance.

Build a gaming theme with question blocks, mushrooms, and coin-shaped ornaments. Repeat yellow in a few places down the tree, then use red or green accents to connect the smaller prints. Leave space around detailed pieces so their silhouettes remain easy to recognize.

For a glowing version, choose a design intended to hold a light source, with access for assembly and a planned route for the cable. Decide whether you want the whole star to glow or a more selective effect before choosing the file; that decision affects the shell and internal layout.

Making a present for the same Nintendo fan? The Super Mario Kart project in these 3D printed Christmas gift ideas carries the theme beyond the tree.

Pikachu Perched on a Golden Christmas Star

3D printed Pikachu Christmas tree topper sitting on a golden star with a red centerpiece, surrounded by festive ornaments.

The Pikachu Christmas Tree Topper on Snapmaker Space combines a chibi Pikachu with a gold-colored five-point star, a bold red centerpiece, and a spiral cone underneath for placement on the tree. The character sits above the star, creating a recognizable focal point with a traditional Christmas outline beneath it.

Pull yellow, gold, and red from the design when choosing the rest of your decorations. Red ball ornaments and gold ribbon connect it to a traditional tree. For a more character-focused display, add Poké Ball-inspired ornaments and use plain ball ornaments between them to keep individual details visible.

This model gives Snapmaker U1 owners a concrete starting point with an available compatible profile. Review the selected profile’s plate layout and filament assignments before printing, especially when recreating all the pictured colors.

A Grinch Hand Peeking Out Near the Crown

A green hand reaching out of the branches creates a small scene: the Grinch appears to be hiding in the tree, reaching for a decoration. It works especially well beside a bright red bauble, where the contrast makes the hand easy to spot.

Use this as an accent near the crown or beside a star topper. Nestle the sleeve among the branches while leaving the fingers and the decoration visible. The placement creates the illusion, so choose the viewing angle before arranging nearby ornaments.

For the rest of the tree, try red-and-white stripes, green accents, and a few oversized ball ornaments. When choosing a model, look for a branch attachment that holds the arm at the intended angle.

A Stained-Glass-Style Star

A stained-glass-style star uses dark outlines and colored panels to give a traditional shape a richer pattern. Jewel tones suit a colorful tree, while amber, cream, and gold suggest a warmer, vintage palette.

Make the panel arrangement part of your choice. Broad sections of color are easier to read from across the room than a dense pattern of tiny details. A symmetrical design can stand on its own above simple round ball ornaments, with one or two panel colors repeated farther down the branches.

If you want light to pass through the panels, choose a file intended for that effect and follow its material and lighting guidance. For an unlit version, color contrast can define the pattern without adding lighting hardware.

Gandalf’s Staff for a Fantasy-Themed Tree

A topper inspired by Gandalf’s staff gives a woodland tree a recognizable fantasy reference. Focus on the branching staff head and its pale color, using the tree’s height to suggest the long shape of the staff.

Carry the setting through pinecones, leaf-shaped ornaments, small houses, or decorations inspired by maps and travel. White and silver can highlight the topper, while muted green and brown keep the branches close to a forest palette.

Pay attention to the outline above the tree. An open, branching staff head needs room around it to remain recognizable. On a narrow tree or beneath a low ceiling, a compact interpretation may suit the display better than a tall replica.

A Low-Poly Star for a Simpler Look

A low-poly star replaces a smooth surface with angular facets. It gives a familiar five-point outline a sculptural appearance, making it a useful choice for a tree built around shape and a limited color palette.

Choose gold for a traditional direction, white for a snowy scheme, or a color already used elsewhere in the room. Repeat the finish on a few smaller ornaments, then vary their shapes: round ball ornaments, flat snowflakes, and open geometric decorations can share one color without looking identical.

View the design from the side as well as the front. A shallow star can suit a tree against a wall; a more dimensional version may be worth considering when the tree is visible from several sides.

A Giant Nozzle for the Maker’s Christmas Tree

An oversized printer nozzle turns the tree itself into part of the design. Position the pointed end above the highest branches and the tapering evergreen looks as though it is being printed beneath the nozzle.

A brass-colored finish helps communicate the shape. Small Benchy boats, gears, filament-spool ornaments, or miniature tools can extend the workshop theme. A short strand of filament-shaped decoration below the nozzle could make the visual joke even clearer.

Keep the nozzle’s tip visible when arranging the upper branches. A broad or detailed body can disappear into the foliage unless you leave a clear gap beneath it.

An Angel or Ophanim-Inspired Centerpiece

An angel silhouette suits a tree with white, gold, or silver decorations. Wings and a flowing gown give the topper a clear outline; a single-color interpretation lets that shape carry the design. Repeat the metallic accent on ribbon or a few smaller ornaments to connect it with the branches.

For an unconventional direction, an Ophanim-inspired design with nested rings and eye motifs creates a more theatrical centerpiece. Keep nearby decorations simple so the rings have a clear backdrop. A multi-part version calls for more attention to assembly and balance, particularly if lighting is part of the design.

For another angel interpretation, the Snapmaker community’s Christmas project gallery includes Michael Winkler’s Artisan-printed tree topper, painted for a stone-like finish and completed with glitter.

Bring the Theme Down the Tree With Matching Ornaments

Once you have chosen a topper, select two or three colors to repeat down the tree. Alternate detailed prints with plain ball ornaments or ribbon, and spread the character pieces out so each has room around it.

red and cream 3D printed Voronoi Christmas ornament

These three Snapmaker Space models offer different ways to build that connection:

  • Christmas Wreath Ornament: A familiar holiday shape to pair with a playful topper. Choose a palette that echoes the star, ribbon, or existing ball ornaments.
  • Festive Raccoon Wreath Ornament: A character accent for a cheerful tree. Shared colors can connect different characters without making every decoration part of the same series.
  • Christmas Voronoi Ornament: An open geometric pattern to introduce a different texture beside solid prints. Repeating one color helps it sit comfortably with a more elaborate topper.

For additional shapes, explore these 3D printed Christmas ornament ideas, including spiral ball ornaments, miniature winter scenes, and sci-fi-inspired decorations. Print a small first batch and view the arrangement from across the room before making a full set.

Check Size, Mounting, and the Print Profile

A tree topper needs to suit the tree as well as the theme. Before starting a long print, check how the finished shape will sit above the branches.

Judge the proportions. Measure the space above the tree and consider the topper’s width as well as its height. A paper silhouette at the intended size can help you compare a broad star with a tall staff-shaped design.

Inspect the attachment. Check the model for a cone, socket, clamp, or other mounting feature and compare it with your actual tree top. Changing the scale changes the mounting dimensions too. If the attachment is a separate part, you can print it first to check the fit.

Consider support and balance. Look at where the topper’s weight will sit relative to the mount and how the upper branches will support it. Include any separate parts or lighting components when planning the assembled piece.

Review the complete print. Check the printer selection, filament assignments, supports, and assembly notes in the chosen profile. Use the slicer’s estimate at your intended size to plan time and material. Confirm any lighting components and cable access before printing an illuminated design.

Choose the topper that gives you the clearest picture of the finished tree. If Pikachu is your starting point, open the Snapmaker Space model and U1-compatible profile, check the dimensions, and choose a few ornaments that repeat its colors. That first small set will show you how the theme works on your own tree.