Guides
You’ve just finished assembling your new machine, or maybe you’ve just swapped in a fresh spool of filament. You hit print on a complex mechanical part, wait four hours, and… it doesn’t fit. The holes are too tight, the square edges are bulging, and the surface has
Guides
Multi material 3D printing has become one of the most searched—and most misunderstood—topics in consumer and prosumer 3D printing. On paper, it sounds simple: load multiple filaments, press print, and get parts that combine rigid and flexible sections, or dissolve supports away cleanly in water. In practice, many
Guides
If you’ve spent any time around a 3D printer, you’ve probably met it already. The moment you lift the enclosure door and see a sad pile of stringy plastic where your part should be. Sometimes it’s not a full failure, just sagging loops or rough, droopy edges
Guides
You’ve just unboxed your new 3D printer. It’s sitting on your desk, a marvel of metal and potential, but there is often a moment of hesitation for new makers. You might be asking, “Do I need to be an engineer to run this?” or “What do all these
Guides
When a 3D print feels weak or snaps too easily, most people assume the fix is more infill. It seems logical. More plastic inside should mean more strength. In reality, that approach often wastes time and filament while doing very little to improve durability. The real secret sits in a
Guides
In the world of 3D printing, few finishes are as captivating as real metal. You’ve likely scrolled through social media and seen 3D printed busts that look like solid antique bronze, or mechanical parts with the gleaming shine of chrome. This isn't just metallic paint. It is
Guides
Picture this: You’re baking cookies with your kids on a Sunday afternoon. The shapes are unique—a heart with your child’s name, or a star with a custom swirl. You didn’t buy these cookie cutters; you made them yourself on your 3D printer. As 3D printing becomes
Guides
There is nothing quite as heart-sinking as checking on a 10-hour print only to find the last few inches look like a brittle sponge. Or perhaps you’ve returned to find the printer “air printing” inches above the model, with no plastic coming out at all. This is under-extrusion. It
Guides
You are sketching an idea for a small 3D print or thinking of making a simple engraved gift, and then the real question hits you. How do you change your idea on paper into something a machine can make? Most people find this hard the first time they try to
Guides
If you’ve ever waited 14 hours for a print that failed in the last ten minutes, or struggled with ghosting artifacts on your models, you’ve likely stumbled into the debate of Marlin vs. Klipper. For many users, firmware is just "the stuff that makes the printer beep.
Guides
PETG is one of those filaments people turn to when they want something tougher than PLA but not as temperamental as ABS. It’s strong, holds up well under heat, and has a solid balance between flexibility and rigidity. When paired with a Snapmaker, especially the Direct Drive setups, you
Guides
A clogged nozzle can mess up a print pretty quickly, even if the rest of the printer is doing fine. Most blockages start as tiny buildups you don’t notice at first, and then they keep growing until the filament barely comes out. In this guide, we’re walking through